Which Moultrie Solar Pack Keeps Your Cameras Running?

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Trail camera setups for remote wildlife monitoring and property surveillance demand steady electrical power to maintain cellular connectivity and sensor triggering. Traditional disposable AA alkaline or lithium cells discharge quickly when cameras send frequent image bursts or video clips across cellular towers, forcing property owners to make regular treks to remote fields just to maintain surveillance coverage. Choosing the right power configuration means deciding between standalone solar collectors, all-in-one panels with integrated backup cells, multi-camera bundle packs, internal rechargeable lithium cartridges, and legacy external panels. Having an uninterrupted outdoor power setup ensures remote trail cameras stay active across seasons without human disturbance.

The Moultrie ecosystem organizes its solar and power hardware into specific categories defined by solar wattage, battery bank capacities, and camera generation compatibilities. Standard 3.4-watt collectors provide adequate energy replenishment for areas receiving consistent direct overhead light, while heavy-duty 10-watt solar arrays generate substantially more current to offset dense overhead tree canopies and extended overcast stretches. Moultrie also supplies bundled multi-packs that interface with newer EDGE 3 digital telemetry systems, standalone 12-volt battery panels for legacy cameras, and compatible third-party internal lithium cartridges from Lesaps. Evaluating this moultrie solar pack comparison allows camera users to determine which moultrie solar pack to buy for their regional weather, vegetation density, and camera layout. Much like evaluating high-capacity off-grid gear such as ecoflow solar panels portable systems for remote base camps, selecting trail camera power equipment requires balancing electrical wattage against daily ambient sunlight.

Moultrie Solar Power Packs Lineup at a Glance

Best for: Multiple cameras in shaded timber parcels

Pros

• Two high-efficiency 10W panels
• App power metrics with EDGE 3
• Fast 30-minute daily sunlight recharge

Cons

• Bulky dual panel package
• Smaller 3350mAh capacity per panel

Best for: Dual camera setups in clear fields

Pros

• Two 3.4W solar units included
• EDGE 3 app telemetry reporting
• IP65 weather-resistant housings

Cons

• Requires direct sunlight
• Modest 3350mAh capacity per unit

Best for: Single Edge cameras in open sun

Pros

• Integrated 3.4W solar panel
• IP65 water-resistant casing
• Rapid one-hour sun recharging

Cons

• Single camera application
• Smaller 3350mAh reserve

The Models in Detail

Moultrie

The standard Moultrie 3.4W Solar Panel Power Pack (model MMA-14126) is built as a direct outdoor power solution for single trail camera setups. Operating as a moultrie solar panel power pack, this unit pairs an efficient 3.4-watt solar surface with an internal 7.2-volt, 3350mAh rechargeable battery bank. According to the manufacturer listing, the integrated battery stores adequate electrical energy to keep a connected camera functioning for up to nine consecutive days without direct sunlight. Recharging is rapid in clear conditions, reaching a full replenishment state with approximately one single hour of full sun exposure.

Physical durability is centered around harsh field resilience. The housing holds an IP65 water-resistant rating to protect sensitive electronics against blowing rain and dust storms, while the exterior connection points feature varmint-resistant cables and locking cable mechanisms to prevent gnawing rodents or shifting tree limbs from pulling cords free. The package includes an adjustable tree strap, an angled mounting bracket, and a USB-C to elbow barrel jack connection cable. This compact model weighs 1.1 pounds and measures 5.24 inches long by 2.5 inches wide by 8.6 inches high.

This unit is designed for hunters and land managers deploying a single EDGE Series trail camera or USB-C compatible device in open tree stands, food plot borders, or clearings that receive reliable direct sunlight. However, if your camera is situated deep beneath dense pine boughs or old-growth hardwoods where direct sun is scarce, this moultrie solar power pack 3.4w unit gives way to higher-output 10-watt configurations.

01 Moultrie Solar Panel Power Reliable Power, Rain or Shine

Check price on Amazon Our score: 8.0/10

Best for: Cameras under dense timber canopy

Pros

• High-output 10W panel
• Massive 15000mAh internal battery
• 60 percent larger panel surface

Cons

• Heavier physical profile
• Single camera pack

Designed specifically to overcome low-light environments, the Moultrie Solar Panel Power Pack (model MMA-14118) provides a substantial jump in both solar generation and electrical storage. The manufacturer equips this unit with a 10-watt solar panel surface that is 60 percent larger than standard camera panels, allowing it to harvest three times more energy in field conditions. A massive built-in 15,000mAh rechargeable battery bank acts as an expansive energy reservoir, ensuring continuous cellular transmission even across prolonged stretches of overcast skies and rainy weather.

The electrical specifications indicate an amperage capacity of 3 amps and a maximum listed voltage of 12 volts, equipped with MC3 and USB-C connection ports. Its exterior measures 2.87 inches long, 11.13 inches wide, and 9.69 inches high, utilizing durable plastic housing. Setup is made straightforward through the included tree strap and flexible multi-angle mount, allowing owners to position the wide surface toward whatever canopy gaps provide sun penetration. Moultrie also backs the unit with seven-day-a-week customer support based in the United States.

This moultrie solar power pack 10w model serves land stewards with trail cameras posted in shaded river bottoms, deep timber, or regions subject to extended winter cloud cover. The expansive 15,000mAh internal reserve gives it superior longevity over smaller 3350mAh packs. Conversely, users managing multiple cameras on a single perimeter fence line may prefer multi-pack options that furnish multiple cameras simultaneously.

02 Moultrie Solar Power Pack II Eliminate AA Batteries – Directly connect to any EDGE Series camera or

Check price on Amazon Our score: 9.0/10

The Moultrie Solar Power Pack II 2-Pack (model MMA-14243) supplies a pair of matching 3.4-watt solar collectors engineered to eliminate disposable AA batteries across two camera locations. Each unit in this bundle outputs 7.2 volts of direct current and features an integrated 3350mAh power bank to store supplemental power for cloudy periods. As a moultrie solar power pack ii 2-pack configuration, the set includes two complete solar power packs and two dedicated charging cables, with the combined shipment weighing 2.2 pounds.

A distinct feature highlighted in the product listing is its integration with modern EDGE 3 series cameras. When connected to an EDGE 3 camera, these Generation II units communicate power metrics directly into the Moultrie App, enabling users to check daily recharge rates and live battery reserves remotely from a smartphone or office computer. Recharging requires just one hour of full direct daily sunlight under typical field demands. Like its single-pack sibling, the housing carries an IP65 water-resistant construction designed to withstand persistent precipitation.

This bundle is ideal for property owners who operate two EDGE Series cameras in sunlit open pasture borders or ridge tops and want matching hardware with live remote app reporting. If your trail cameras are positioned across heavier timber canopy, this pair yields to the 10-watt dual-pack variant that captures daylight faster through shade.

03 Moultrie Solar Power Pack II Eliminate AA Batteries – Directly connect to any EDGE Series camera or

Check price on Amazon Our score: 8.4/10

For multi-camera surveillance in darker, heavily wooded parcels, the second generation Moultrie Solar Power Pack II 10W 2-Pack (model MMA-14246) upgrades the solar collection capability across two complete panels. Each unit features a 10-watt collector coupled with a 7.2-volt direct current output and an onboard 3350mAh battery bank. The higher 10-watt capacity allows each panel to fully replenish typical daily power consumption with approximately 30 minutes of direct sunlight, making it remarkably efficient under filtered or broken light.

Like the lower-wattage Gen II units, this pair supports advanced power metrics reporting in the Moultrie App when paired directly with EDGE 3 trail cameras. It also connects directly to any standard EDGE Series camera or integrates with POWER MAGS for auxiliary backup power. The bundle contains two complete 10-watt solar panels and two charge cables, arriving at a combined package weight of 3.4 pounds in sturdy weather-resistant plastic housings.

This dual 10-watt kit suits hunters monitoring multiple trail corridors, timber bedding areas, or heavily canopied logging roads where daylight is filtered through thick foliage. While it delivers excellent low-light harvesting speed, the 3350mAh onboard reserve is smaller than the single-pack 10-watt model’s 15,000mAh bank. For users seeking off-grid energy insights, harvesting principles here mirror the efficiency trade-offs seen on larger remote arrays like a renogy 400w portable solar panel array deployed at field outposts.

04 Lesaps 2-Pack 5000mAh Replacement Battery Features a built-in USB-C port (cable included) for quick charging

Check price on Amazon Our score: 9.2/10

Best for: Cameramen wanting internal rechargeable packs

Pros

• Two 5000mAh lithium cartridges
• Direct USB-C port recharging
• Cold weather operation to -20F

Cons

• Third-party Lesaps manufacture
• No built-in solar generation

A clear departure from exterior solar panels, the Lesaps 2-Pack 5000mAh Replacement Battery (model MMA-EM8) provides an internal power alternative for Moultrie EDGE cameras. Manufactured by Dongguan Hongbo New Energy Technology Co. Ltd. under the third-party brand Lesaps, these rechargeable lithium-ion cartridges slide directly into the camera’s internal battery tray, fitting the Edge, Edge Pro, Edge 2, and Edge 2 Pro models. Each pack features a 10.8-volt direct current output and a 5000mAh capacity.

Rather than relying on exterior cords or solar mounting arms, this moultrie edge replacement battery pack charges via a built-in USB-C port using an included cable. An integrated array of four LED status indicators tracks charge levels in real time, turning off when full capacity is achieved. For challenging winter field conditions, the battery is engineered to operate seamlessly from -20°F up to 140°F, incorporating a smart chip with six layers of protection covering overcharge, overdischarge, voltage fluctuation, current surges, overheating, and short circuits. It is also listed as solar-ready, allowing connected exterior solar panels to maintain the internal cell.

This two-pack is best suited for property owners who prefer a clean camera profile without exterior cables that animals might chew, or who want a rapid battery swap routine where one pack charges indoors while the other powers the camera. Because it is an internal battery pack produced by a third party rather than an original Moultrie solar collector, users seeking passive, hands-off solar regeneration will still need to tether an external solar accessory.

05 Moultrie 12V Camera Power Panel 4' power cord allows panel to be mounted in direct sunlight

Check price on Amazon Our score: 8.0/10

Best for: Traditional 12V Moultrie trail cameras

Pros

• Dedicated 12V power delivery
• Built-in lithium battery storage
• Four-foot flexible power cord

Cons

• Not compatible with Micro Series
• Older connection standard

The Moultrie 12V Camera Power Panel (model MCA-13302) is a specialized solar solution designed to support Moultrie Mobile and traditional non-Edge 12-volt Moultrie game cameras. Manufactured under Pradco Outdoor Brands, this moultrie 12v camera power panel houses an integrated 12-volt lithium battery charged directly by its built-in solar panel face. It is rated at an amperage capacity of 4.17 amps to handle the sudden current draw required when cellular radios transmit high-resolution images.

The unit comes equipped with a four-foot external power cord, giving users the freedom to mount the panel several feet above or to the side of the camera to capture direct sunlight through tree openings. Mounting flexibility is supported by included hardware for trees and poles, as well as an integrated 1/4-inch by 20-thread socket compatible with standard camera stakes and tripods. The unit dimensions measure 7 inches by 3 inches by 6 inches.

This panel is ideal for owners operating traditional Moultrie trail cameras or Moultrie Mobile cellular models that require a 12-volt barrel connection. The manufacturer listing notes an explicit limitation: this power panel is not compatible with Moultrie Micro Series cameras. Furthermore, it does not support the modern USB-C cabling or app-based power metric telemetry found on the latest EDGE Series hardware.

Matching a Model to Your Setup

• For a single Edge camera in an open field or sunny food plot border: Moultrie 3.4W Solar Panel Power Pack provides steady power with minimal bulk and rapid one-hour sun replenishment.
• For cameras stationed in shaded timber, river bottoms, or regions with persistent cloud cover: Moultrie Solar Panel Power Pack – 10W provides a large 15,000mAh battery reserve and a 60 percent larger solar panel face to capture filtered daylight.
• For two Edge cameras placed along sunny fence lines or pasture edges: Moultrie Solar Power Pack II 3.4W 2-Pack supplies matched hardware with live EDGE 3 Moultrie App power metric tracking.
• For multiple cameras under deep pine canopy or dark game corridors: Moultrie Solar Power Pack II 10W 2-Pack cuts daily solar recharge requirements down to 30 minutes of sunlight per panel.
• For clean camera setups without external mounting brackets or chewable cables: Lesaps 2-Pack 5000mAh Replacement Battery provides rechargeable internal lithium trays that swap quickly without remounting hardware.
• For legacy Moultrie Mobile and traditional 12-volt trail cameras: Moultrie 12V Camera Power Panel delivers direct 12-volt power via a four-foot cord and standard tripod threading.

Before You Buy

Before committing to an external power accessory, carefully verify your trail camera model’s physical port style and voltage input requirements. Moultrie’s EDGE Series cameras run on different voltage profiles and cable standards than traditional Moultrie trail cameras. While the Gen II 3.4W and 10W solar packs utilize USB-C and 7.2V DC outputs, the legacy 12V Camera Power Panel operates at 12 volts and is explicitly incompatible with Moultrie Micro Series devices. Furthermore, the product listings for the Gen II 2-packs do not specify whether flex tree mounts are included alongside the charge cables and panels, so owners may need to supply their own mounting brackets or strap hardware depending on how they plan to secure the collectors.

It is also worth considering how environmental conditions impact energy gathering. The listings note rapid recharge times under ideal sunlight, but actual performance in field conditions depends heavily on southern sky exposure, seasonal leaf drop, and dirt or pollen buildup on the solar glass. Much like the real-world operating limits documented when running an ebl 200w portable solar panel high efficiency solar power panel, solar cells require clean glass and direct unimpeded rays to achieve their maximum rated wattage. If you choose third-party internal batteries like the Lesaps lithium packs, note that they do not generate solar power on their own; they eliminate single-use alkaline purchases, but will require either manual indoor recharging via USB-C or a paired exterior moultrie edge solar panel to remain continuously active in the field.

FAQ

Can I use the Moultrie 3.4W solar panel on non-Moultrie cameras?

The listing specifies that the 3.4W Solar Power Pack is compatible with EDGE Series cameras, standard USB-C devices, and other major camera brands that accept its 7.2-volt output and connector specifications. However, you must confirm that your specific camera model matches the 7.2V direct current rating and barrel or USB-C connection style before attaching the panel.

How does the EDGE 3 power reporting feature work?

When you connect either the 3.4W or 10W Moultrie Solar Power Pack II directly to an EDGE 3 trail camera, the hardware communicates power metrics into the Moultrie App. This allows you to track daily recharge rates, monitor reserve percentages, and verify that your solar panel is receiving adequate sunlight without having to walk up to the camera.

What is the difference between the single 10W pack and the 10W 2-pack?

The single 10W solar panel (MMA-14118) includes an expansive 15,000mAh internal battery bank and 12V maximum rated output, making it an all-in-one powerhouse for a single camera in low-light environments. The 10W 2-Pack (MMA-14246), by contrast, supplies two individual 10W panels equipped with 3350mAh internal batteries, 7.2V DC outputs, and EDGE 3 app reporting designed to service two cameras simultaneously.

Is the Lesaps replacement battery made by Moultrie?

No, the Lesaps 2-Pack 5000mAh battery is manufactured by Dongguan Hongbo New Energy Technology Co. Ltd. under the Lesaps brand name. It is an aftermarket, third-party rechargeable lithium-ion battery designed specifically to fit the internal battery compartment of Moultrie Edge, Edge Pro, Edge 2, and Edge 2 Pro trail cameras.

Will the Moultrie 12V Camera Power Panel work with Moultrie Micro cameras?

No, the manufacturer listing explicitly states that the Moultrie 12V Camera Power Panel (model MCA-13302) is not compatible with Moultrie Micro Series cameras. It is designed to extend battery performance for standard Moultrie Mobile units and traditional 12-volt Moultrie game cameras.