As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The dyna glo rmc 95c6b indoor kerosene convection vs workhorse kfa135wh comparison highlights two distinct heating options from Dyna-Glo. Both units burn kerosene to generate heat, but they serve different environments. The RMC-95C6B is designed for indoor comfort with a convection method. The Workhorse KFA135WH uses forced air and targets larger, non-residential spaces. You need to choose based on your ventilation and space size.
Heating Method
Convection
Forced Air
Heat Output
23,000 BTU
135,000 BTU
Intended Use
Indoor Use
Not for residential living areas
Color
Black
Gray
Wheels
not listed
10-inch Flat-free
Choose the first if
- You need a heater for a smaller indoor room with proper ventilation.
- You prefer a quieter convection heat output over forced air.
- You want a unit with a lower BTU rating for moderate heating needs.
Choose the second if
- You require high heat output for large commercial or industrial spaces.
- You need mobility features like flat-free wheels and lift handles.
- You are heating a well-ventilated area that is not a living space.
Verdict
Choose the RMC-95C6B for smaller indoor rooms where convection heat is sufficient. Pick the Workhorse KFA135WH for large, well-ventilated commercial spaces that need intense forced-air heat. The choice depends entirely on your space size and ventilation capabilities.
Heater Comparison: RMC-95C6B vs Workhorse
Heat Output
Edge: Tie
The Dyna-Glo RMC-95C6B delivers 23,000 BTU of heat. This output suits smaller indoor spaces where gentle, steady warmth is needed. In contrast, the Dyna-Glo Workhorse KFA135WH produces 135,000 BTU. This massive output is designed for large, open areas like workshops or garages. The difference in power is significant. You need far more energy to heat a large commercial space than a small room. The Workhorse provides nearly six times the heat of the RMC-95C6B. Choose the RMC-95C6B for small rooms. Choose the Workhorse for large zones.
Heating Method
Edge: Tie
The RMC-95C6B uses convection heating. This method warms the air slowly and evenly. It is ideal for residential settings where you want consistent comfort without drafts. The Workhorse KFA135WH uses forced air. This method pushes heated air quickly across a room. It is better for spaces where you need rapid temperature changes. Forced air can feel more intense. Convection feels more natural. Your choice depends on how you want the heat to feel. Convection is gentler. Forced air is faster.
Intended Use
Edge: Dyna-Glo RMC-95C6B 23,000 BTU Heater
The RMC-95C6B is labeled for indoor use. It is designed to be safe in living spaces with proper ventilation. The Workhorse KFA135WH has a clear warning. It is not for use in residential living areas. It requires adequate ventilation and is meant for industrial or semi-industrial spaces. You cannot safely use the Workhorse in a bedroom or living room. The RMC-95C6B is the only safe option for home interiors. The Workhorse is strictly for non-residential buildings.
Portability Features
Edge: Dyna-Glo 135K BTU Kerosene Heater
The Workhorse KFA135WH includes 10-inch flat-free wheels. It also has front and rear lift handles. These features make it easy to move around a large workspace. The RMC-95C6B data does not list wheels or handles. It is likely a stationary unit meant to stay in one place. If you need to move your heater, the Workhorse is the clear choice. The RMC-95C6B is better for fixed locations. Portability is a key advantage for the Workhorse model.
Physical Size
Edge: Dyna-Glo RMC-95C6B 23,000 BTU Heater
The Workhorse KFA135WH is large. It measures 41.9 inches long, 21.6 inches wide, and 32.4 inches high. It weighs 55.8 pounds. This size allows for its high BTU output. The RMC-95C6B data does not provide specific dimensions. However, its lower BTU rating suggests a smaller footprint. The Workhorse takes up more floor space. You need a larger area to place it safely. The RMC-95C6B is likely more compact. Space constraints favor the smaller unit.
Color Options
Edge: Tie
The RMC-95C6B is available in black. This color is common for indoor appliances. The Workhorse KFA135WH is gray. This color is typical for industrial equipment. The choice is purely aesthetic. Black may blend better in a home. Gray may look more professional in a workshop. Neither color affects performance. You should pick the color that fits your environment. The data does not indicate other color options for either model.
Which heater fits your space
Homeowners needing quiet indoor warmth
Our pick: Dyna-Glo RMC-95C6B 23,000 BTU Heater
The Dyna-Glo RMC-95C6B uses convection heating for gentle warmth. Its 23,000 BTU output is ideal for smaller indoor rooms. This model is explicitly rated for indoor use. The black finish blends into living spaces. It provides steady heat without the force of a fan.
Workers heating large commercial areas
Our pick: Dyna-Glo 135K BTU Kerosene Heater
The Workhorse KFA135WH delivers 135,000 BTU for massive spaces. It uses forced air to move heat quickly. This unit is not for residential living areas. Its industrial design includes wheels and handles for mobility. It requires proper ventilation due to high output.
Users prioritizing portability and size
Our pick: Dyna-Glo RMC-95C6B 23,000 BTU Heater
The RMC-95C6B is a compact indoor unit. It lacks the large footprint of the Workhorse. You do not need to manage its 41.9-inch length or 55.8-pound weight. This smaller heater fits easily into standard rooms. It is designed for stationary indoor placement rather than frequent moving.
Garage or workshop owners
Our pick: Dyna-Glo 135K BTU Kerosene Heater
The Workhorse KFA135WH is built for tough environments. Its forced air system heats large, open areas quickly. The gray color is practical for industrial settings. Features like lift handles and cord wrap aid in setup. The 10-inch wheels allow you to move it easily across floors.
Dyna-Glo RMC-95C6B 23,000 BTU Heater
Best for: small indoor spaces needing moderate heat
- Heat Output
- 23,000 BTU
- Heater Type
- Convection
- Fuel Type
- Kerosene
- Operating Modes
- Heating
- Color
- Black
- Use
- Indoor Use
This Dyna-Glo unit provides 23,000 BTU of heat using kerosene. It uses convection heating for indoor use. The black finish is simple and functional. You need indoor space for safe operation. This model suits smaller rooms where moderate heat is enough. It does not offer forced air like larger workhorse models. You get steady warmth without complex settings.
- 23,000 BTU heat output
- Indoor safe design
- Convection heating method
- Black color finish
- 23,000 BTU output is lower than the 135,000 BTU alternative
- Convection heating is slower than forced air
- Single operating mode for heating only
- You need indoor heat for a small room
- You prefer convection warmth over forced air
- You want a simple heating mode
- You need high power for large spaces
- You want forced air circulation
- You need outdoor use capability
Verdict: Dyna-Glo 23K BTU Indoor Kerosene Heater fits small indoor areas needing gentle convection heat. It is not for large spaces requiring high output.
Dyna-Glo 135K BTU Kerosene Heater
Best for: large commercial or industrial heating needs
- Heater Type
- Forced Air
- Fuel Type
- Kerosene
- Operating Modes
- Heating
- Color
- Gray
- Dimensions
- 41.9 × 21.6 × 32.4 inches
- Weight
- 55.8 pounds
This Dyna-Glo Workhorse unit delivers 135,000 BTUs of heat via forced air. It measures 41.9 inches long, 21.6 inches wide, and 32.4 inches high, weighing 55.8 pounds. The gray heater includes 10-inch flat-free wheels and lift handles for moving. You need proper ventilation. It is not for residential living areas. This model suits large, well-ventilated industrial or commercial spaces where high output is necessary.
- 135,000 BTU heating output
- 10-inch flat-free wheels for mobility
- Front and rear lift handles
- Cord wrap feature
- Glove-friendly industrial fuel cap
- Large footprint at 41.9 inches long
- Heavy build at 55.8 pounds
- Restricted to non-residential use
- You need high BTU output for large spaces
- You require easy mobility with wheels and handles
- You have adequate ventilation for kerosene use
- You need a heater for residential living areas
- You have limited space for a 42-inch unit
- You cannot ensure proper ventilation
Verdict: Dyna-Glo 135K BTU Kerosene Heater provides serious heat for commercial jobsites. You should buy it if you need portable power in a ventilated workspace.
Specifications side by side
| Spec | Dyna-Glo RMC-95C6B 23,000 BTU Heater | Dyna-Glo 135K BTU Kerosene Heater |
|---|---|---|
| Heat Output | 23,000 BTU | – |
| Heater Type | Convection | Forced Air |
| Fuel Type | Kerosene | Kerosene |
| Operating Modes | Heating | Heating |
| Color | Black | Gray |
| Operating Mode | Heater | Heater |
| Heating Method | Convection | – |
| Use | Indoor Use | – |
| Dimensions | – | 41.9 × 21.6 × 32.4 inches |
| Weight | – | 55.8 pounds |
| Size | – | 41.85"L x 21.56"W x 32.44"H |
| Model | – | 246120 |
Frequently asked questions
Is the Dyna-Glo RMC-95C6B safe for indoor use?
Yes, the Dyna-Glo RMC-95C6B is explicitly rated for indoor use. It uses convection heating to provide gentle warmth. This makes it suitable for small indoor spaces. You should not use it in large areas requiring high output. The black finish is designed to blend into living spaces comfortably.
What is the heat output difference between the two heaters?
The RMC-95C6B produces 23,000 BTU, while the Workhorse KFA135WH generates 135,000 BTU. This significant difference means the RMC-95C6B suits smaller rooms. The Workhorse model is built for large, open commercial or industrial jobsites. Choose based on the size of the area you need to heat.
Which heater is better for a commercial jobsite?
The Dyna-Glo Workhorse KFA135WH is the better choice for commercial jobsites. It provides 135,000 BTU of forced air heat. This output is designed for large, open areas. The RMC-95C6B only offers 23,000 BTU via convection, which is insufficient for such demanding environments. You need portable power in ventilated workspaces for the Workhorse.
How does the heating method differ between these models?
The RMC-95C6B uses convection heating for gentle, steady warmth. The Workhorse KFA135WH utilizes forced air technology. Forced air moves heat more aggressively, which is necessary for large spaces. Convection relies on natural air circulation, making it quieter and softer for small indoor rooms.
What are the physical dimensions of the Workhorse heater?
The Dyna-Glo Workhorse KFA135WH measures approximately 41.9 inches in length, 21.6 inches in width, and 32.4 inches in height. It weighs 55.8 pounds. These dimensions indicate a larger footprint suitable for industrial settings. The RMC-95C6B is smaller, fitting better in compact indoor areas.
What color options are available for these heaters?
The Dyna-Glo RMC-95C6B comes in a black finish. The Workhorse KFA135WH is available in gray. These colors reflect their intended environments. Black blends into home interiors, while gray is typical for commercial or industrial equipment. The color does not affect heating performance.
Can I use the RMC-95C6B in a garage?
The RMC-95C6B is rated for indoor use, so a garage is acceptable if it is enclosed. It provides 23,000 BTU via convection. This output is best for small indoor spaces. If your garage is large or unheated, the Workhorse KFA135WH with 135,000 BTU forced air would be more effective.