As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Most drilling around the home is not hard; it is awkward. Hinges inside a kitchen cabinet, a bracket behind a washing machine, a screw between two studs, the underside of a desk: a standard drill driver is simply too long to fit. A multi-head drill solves that by letting you swap the front of the tool. Clip on a right angle head to drive a screw inside a cabinet, an offset head to get tight against a wall, a quick release bit holder for fast screwing, or a regular chuck for drilling. The question is which DEWALT body suits your battery platform, and which bits and drivers finish the kit.
The range in this roundup is split into two groups. There are three multi-head drill drivers: the ATOMIC 20V MAX DCD803B, the 18V XR DCD803KN-XJ (a version aimed at markets using DEWALT’s 18V XR battery naming), and the smaller XTREME 12V MAX DCD703F1 kit. Then there are three accessory sets that make the heads useful: a 71-piece screwdriver bit and nut driver set, a 5-piece multi-material drill bit set, and a 5-piece compact nut driver set designed to work with right angle attachments. We compared listings and specs rather than hanging cabinets with each tool.
DeWalt Multi-Head Drill Drivers Lineup at a Glance
Best for: Driving hex nuts in cramped spaces
Pros
- Compact nut drivers
- Magnetic fastener retention
- Fits right angle attachments
Cons
- Sizes not listed
| Product | Type | Voltage or pieces | Key detail |
|---|---|---|---|
| DCD803B ATOMIC 5-in-1 | Multi-head drill/driver | 20V MAX, tool only | 1650 rpm, 1/2 in metal chuck |
| DCD803KN-XJ 18V XR | Multi-head drill driver | 18V XR | 73 Nm, 1800 rpm |
| DWMT73808 bit set | Screwdriver bits and nut drivers | 71 pieces | Lockable stacking cases |
| DWA56015 drill bits | Multi-material drill bits | 5 pieces | Made in the United States |
| DCD703F1 XTREME 5-in-1 | Multi-head drill/driver kit | 12V MAX | 1.6 lbs, 15 clutch settings |
| DWAIND-5 nut drivers | Compact nut drivers | 5 pieces | Magnetic, impact ready |
The Models in Detail
DeWALT DCD803B ATOMIC 20V MAX 5-in-1 Tackle diverse applications with the included attachments
Check price on Amazon Our score: 9.4/10
Best for: 20V MAX owners fitting cabinets and appliances
Pros
- Four heads incl. 1/2 in metal chuck
- Right angle and offset attachments
- Wall organizer holds 4 heads
- Up to 15% more power
Cons
- Tool only, no battery
The DeWALT DCD803B ATOMIC 20V MAX 5-in-1 is a brushless multi-head drill/driver sold as a bare tool. It comes with four attachments: a 1/2 in. (13mm) metal chuck, a 1/4 in. hex right angle head, a 1/4 in. hex quick release offset head and a 1/4 in. hex quick release. A yellow collar around the chuck shows when an attachment is locked on, and an organizer mounts on the wall or hangs from belt hooks to store up to four heads. DEWALT claims up to 15% more power in confined applications.
The spec sheet lists up to 1650 rpm and a 1/2 inch drilling capacity in wood and metal, and says it works with DEWALT 20V MAX batteries. In a home, that combination handles pilot holes for shelving, driving cabinet hinge screws with the right angle head, and working behind appliances with the offset head.
This is the default pick for anyone already on the 20V MAX platform. It is tool only, so you need a battery and charger. For more on the 20V version in use, see our guide to the DEWALT 5 in 1 drill 20V.
DEWALT 18V XR Multi-Head Drill Driver Switch easily between right angle, offset, traditional chuck, and quick
Check price on Amazon Our score: 9.2/10
Best for: 18V XR battery users outside the US
Pros
- 73 Nm max torque
- Four interchangeable heads
- Brushless, ultra compact
Cons
- Listing partly in German
- Chuck size spec looks wrong
The DEWALT 18V XR Multi-Head Drill Driver (DCD803KN-XJ) has four interchangeable heads: right angle, offset, traditional chuck and a 1/4 inch hex quick release bit holder. The listing gives 73 Nm maximum torque, up to 1800 rpm, a brushless motor and an ultra compact, lightweight build for overhead and tight-space work. Part of the spec sheet is in German, mentioning an LED work light.
The spec sheet lists a maximum chuck size of 0.25 inches, which conflicts with the “traditional chuck” head described in the features; that figure probably refers to the hex bit holder. It lists a 1 inch drilling capacity in wood. The listing does not say whether a battery is included.
It suits users who already have DEWALT 18V XR batteries, which is the naming used outside North America. If you are on 20V MAX, the DCD803B is the matching choice.
DEWALT Screwdriver Bit Set with Nut Drivers, 71-Piece The screwdriver bit set comes with lockable stacking cases
Check price on Amazon Our score: 9.8/10
Best for: Stocking bits for a multi-head drill
Pros
- Screwdriver bits plus nut drivers
- Lockable stacking cases
- Exceeds ANSI specifications
Cons
- Piece count listed as 70 and 71
The DEWALT Screwdriver Bit Set with Nut Drivers (DWMT73808) is the bit library for a multi-head drill. It comes in lockable stacking cases with a transparent lid and a removable internal tray, and DEWALT says the bits exceed ANSI specifications. A vinyl grip multi-bit driver is included for hand use. It weighs 3 pounds.
The listing does not break down bit types or sizes beyond a Phillips drive system, and the description calls it a 70-piece set while the title says 71. The quick release and right angle heads on the multi-head drills take 1/4 in. hex bits, which is the standard for sets like this.
Anyone buying a bare multi-head tool should pair it with a bit set, and this is the broadest option here.
DEWALT DWA56015 Multi-Material Drill Bit Set, 5-Piece The product is 5PC Multi Drill Bit Set
Check price on Amazon Our score: 8.2/10
Best for: Drilling mixed materials around the house
Pros
- 5-piece multi-material set
- Made in the United States
Cons
- No sizes listed
- Description is unrelated
The DEWALT DWA56015 Multi-Material Drill Bit set has five bits and is listed as manufactured in the United States. That is nearly all the listing offers: it does not state bit sizes, shank type or which materials are covered, and the description line refers to an unrelated product. The spec sheet also lists one piece, which conflicts with the 5-piece title.
In general, multi-material bits are designed to drill wood, metal, plastic and masonry with one set, useful for hanging items on mixed wall types.
It suits homeowners who want a small drill bit set for the chuck head. Check sizes in the product photos before relying on it.
DEWALT XTREME 12V MAX Brushless Cordless 5-in-1 ACCESS TIGHT SPACES with compact, lightweight design and 4 dedicated
Check price on Amazon Our score: 8.0/10
The DEWALT XTREME(TM) 12V MAX* Brushless Cordless 5-in-1 Drill/Driver Kit (DCD703F1) is the lightest option, with the bare tool weighing 1.6 lbs. It has four attachment solutions: a right angle head, a quick release offset, a quick release bit holder and a chuck. The spec sheet lists a 0.38 inch chuck, two speeds, 15 clutch settings, up to 1500 rpm, a brushless motor and an LED foot light, with a 2 Ah battery capacity noted for the kit.
The torque figure of 249 ft-lb is far beyond what a 12V drill produces and is almost certainly a unit error. The listing does not detail kit contents beyond the tool and attachments.
This is ideal for light household work, furniture assembly and overhead tasks where weight matters. For heavier drilling, the 20V MAX DCD803B has more power.
DEWALT DWAIND-5 Compact Nut Driver Set Compact nut driver set is designed for greater accessibility
Check price on Amazon Our score: 8.4/10
The DEWALT DWAIND-5 Compact Nut Driver Set has five 1/4-inch hex-shank nut drivers designed for tight spaces. They are impact ready, fit DEWALT right angle attachments, locking bit holders and extensions, and use a magnet to hold fasteners. The set weighs 3.52 ounces.
The listing does not give nut sizes. Compact nut drivers are especially useful with the right angle head for appliance panels and furniture hardware.
Pair it with any multi-head drill for hex bolts. For a broader look at brushless drivers, see our guide to the DEWALT brushless drill driver.
Matching a Model to Your Setup
- Installing kitchen cabinet hinges on a 20V MAX platform: DCD803B plus the 71-piece bit set.
- Outside North America with 18V XR batteries: DCD803KN-XJ.
- Flat-pack furniture and overhead work: DCD703F1 12V kit.
- Appliance panels with hex bolts: DWAIND-5 nut drivers on the right angle head.
- Hanging shelves on mixed walls: DWA56015 bits in the chuck head.
- First-time multi-head owner stocking up: 71-piece bit set.
Before You Buy
The DCD803B is tool only, and the 18V listing does not say whether a battery is included. The 12V kit’s torque figure looks wrong, the 18V chuck spec conflicts with its own features, and the drill bit set lacks sizes and has an unrelated description.
The accessory listings do not specify full contents. In general, confirm your battery platform before buying a bare tool, since 12V, 18V XR and 20V MAX batteries are not interchangeable across these families.
FAQ
What heads come with the DCD803B?
A 1/2 in. metal chuck, a right angle head, a quick release offset head and a quick release bit holder.
Which DEWALT multi-head drill is lightest?
The XTREME 12V DCD703F1, at 1.6 lbs without battery or attachments.
Do the nut drivers fit the right angle head?
Yes, the DWAIND-5 listing says they work in DEWALT right angle attachments.
Is the 18V XR the same as the 20V MAX?
They are listed separately with different model numbers; buy the one matching your batteries.
Does the DCD803B include a battery?
No, it is sold as tool only.